Loading file

SO COIL CAP

Type:PVC Capping Seal
Height:40mm
Gauge:3mm - 5mm
Length:25m Coil
Colour:Black

 

Categories: , Tags: ,

Description

SO COIL CAP is a flexible PVC capping seal for use with 3mm-5mm resilient floorcoverings.
The capping seal is used to finish the top of a resilient floorcovering where it has been coved up the wall and is usually used in conjunction with a cove former.
Supplied in 25m coils to reduce the number of vertical joints on installation.

Technical Data

Type:Capping Seal
Environment:Interior
Used with:Resilient Floorcoverings
Material:Flexible PVC
Height:40mm
Gauge:3mm - 5mm
Length:25m Coil
Colour:Black
Fixing:Adhesive Fix

SO COIL CAP – Data Sheet

Installation

SO COIL CAP should be allowed to acclimatise for 24 hours prior to installation at an ambient temperature of 18o Celsius.

  1. It should be ensured that all surfaces to which the profile is to be fixed are sound, dry, flat and free from any contaminants. Wall surfaces should be free from any previous coverings, linings or adhesive residues used to fix them.  Paint films and any mould must be removed and the affected surface treated correctly.
  2. Lay the lengths of cove former around the perimeter of the area and, using a sharp knife or hacksaw, cut the lengths to size.
  3. All external and internal corners should be cut with the aid of a mitre block.
  4. Once cut, remove the profile away from the wall and lay face down.
  5. Apply a suitable contact adhesive and follow the manufacturer’s instructions for application. SO Flooring Products do not recommend the use of spray adhesives and double-sided tapes.
  6. Place the profile in position, apply firm pressure along the full length to ensure full contact is made by the profile between the wall and the floor.

Related products